KYORITSU 2009R Clamp Meter (KEW 2009R)

Model: KE2009R

Shipping Weight: 0.88 kg
Manufactured by: KYORITSU

✅ The CAT.IV Clamp Meter is capable of measuring Voltage and Current in both very low and high power circuits with precision.
✅ It provides an accurate True-RMS reading of AC current or voltage, even with a distorted waveform.
✅ The device can measure AC and DC currents up to 2000A.

AC A:
- Range: 400.0/2000A
- Accuracy: ±1.3% rdg ±3 dgt (0~400.0A, 150~1700A at 45~66Hz)
±2.0% rdg ±5 dgt (0~400.0A, 150~1700A at 20Hz~1kHz)
±2.3% rdg ±3 dgt (1701~2000A at 45~66Hz)

DC A:
- Range: 400.0/2000A
- Accuracy: ±1.3% rdg ±2 dgt

AC V:
- Range: 40.00/400.0/750V
- Accuracy: ±1.0% rdg ±3 dgt (45~66Hz)
±1.5% rdg ±5 dgt (20Hz~1kHz)

DC V:
- Range: 40.00/400.0/1000V
- Accuracy: ±1.0% rdg ±2 dgt

Resistance (Ω):
- Range: 400.0/4000Ω
- Accuracy: ±1.5% rdg ±2 dgt
(Electronic protection without fuse up to 600V)

Continuity Buzzer:
The buzzer sounds below 20Ω.

Frequency (Hz):
Range: 10.0 ~ 4000Hz
Accuracy: ±1.5% rdg ±5 dgt
(Input sensitivity Current: more than 40A Voltage: more than 10V)

Output Recorder:
DC400mV against AC/DC400.0A
DC200mV against AC/DC2000A

Withstand Voltage:
Can withstand up to 6880V AC for five seconds.

Conductor Size:
Maximum diameter of Ø55mm.

Applicable Standards:
IEC standards including IEC61010-1 CAT.IV600V, CAT.III1000V Pollution degree2, IEC61010-031, IEC61010-2-032, IEC61326-1, IEC61326-2-1.

Power Source:
R6P (1.5V) ×2

Dimensions:
Length:250mm Width:105mm Depth:49mm

Weight:
Approximately540g (including batteries)

Accessories Included:
Test leads (7107A), Output plug (8201), Carrying case (9094), AA batteries (R6P) ×2, Instruction Manual

Optional Accessories:
Multi-Tran (8008) for AC only, Output cord (7014)

Country of Manufacture:
Thailand

Tags:
#TECHNO #Tools #Equipments #Original #OneYearWarranty #ReadyStock #KYORITSU #CLAMPMETER #QUALITY #VALUE #YourChoice