{"product_id":"ingersoll-rand-e699-8-1-inch-air-impact-wrench","title":"Ingersoll Rand E699-8 1\" Drive Air Impact Wrench | 4,300Nm for Heavy Lorry \u0026 Truck","description":"\u003ch1 dir=\"ltr\"\u003e\u003cstrong\u003eIngersoll Rand E699-8 1\" Drive Air Impact Wrench — Pilihan Utama Mekanik Lori Malaysia\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003eThe \u003cstrong\u003eIngersoll Rand E699-8\u003c\/strong\u003e is the go-to 1\" air impact wrench for lorry workshops and heavy truck maintenance centres across Malaysia. Delivering \u003cstrong\u003e4,300 Nm of maximum reverse torque\u003c\/strong\u003e — increased by \u003cstrong\u003e35% from the E688-8\u003c\/strong\u003e — this wrench is built to tackle the toughest lorry tyre bolts, wheel nuts and heavy chassis fasteners that standard ½\" impact wrenches simply cannot handle.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIf you are running a lorry workshop, truck tyre shop or fleet maintenance centre in Malaysia, the E699-8 is the tool your mechanics reach for every day.\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eE699-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIngersoll Rand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrive Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\" Square Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Reverse Torque\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4,300 Nm (3,172 ft-lbs) @ 90 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e4,900 Nm (3,610 ft-lbs) @ 120 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended Torque Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e360 – 3,400 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFree Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4,550 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBlows Per Minute (BPM)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e750 BPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAverage Air Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70 CFM @ load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpact Mechanism\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePinless Single Swinging Hammer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTrigger Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePush trigger (outside trigger)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNPTF Drive (Air Inlet)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInlet Tube\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSound Level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e97.7 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e578.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHousing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePowder coated silver gray aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp dir=\"ltr\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eApplications\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eHeavy truck and commercial vehicle tyre fastening and removal\u003c\/li\u003e\n\u003cli\u003eIndustrial heavy fastening and unfastening operations\u003c\/li\u003e\n\u003cli\u003eMining, construction and plant equipment maintenance\u003c\/li\u003e\n\u003cli\u003eFleet maintenance and tyre service workshops\u003c\/li\u003e\n\u003cli\u003eHigh-torque industrial assembly and disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Lorry Mechanics in Malaysia Choose the E699-8\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTayar Lori Wheel Nuts — No Problem\u003c\/strong\u003e\u003cbr\u003eHeavy truck and lorry wheel nuts require extremely high torque to loosen and tighten — the E699-8 delivers 4,300 Nm at 90 PSI and 4,900 Nm at 120 PSI, making it one of the few tools powerful enough to handle 10-stud and 12-stud lorry wheels with ease.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e35% More Powerful Than the Previous E688-8\u003c\/strong\u003e\u003cbr\u003eWorkshops upgrading from the E688-8 will immediately notice the difference — faster loosening of corroded and overtightened wheel nuts, fewer stuck fasteners and faster tyre change turnaround.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBest Power-to-Weight Ratio in Class\u003c\/strong\u003e\u003cbr\u003e4,300 Nm of torque from a tool weighing only 16.9 kg — mechanics can work through a full shift without the fatigue that heavier industrial wrenches cause.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e8\" Extended Anvil for Lorry Hub Access\u003c\/strong\u003e\u003cbr\u003eThe 8\" extended anvil gives better reach into recessed lorry wheel hubs where standard-length anvils cannot reach — essential for Hino, Isuzu, Mercedes Actros, Volvo and Scania truck wheel work.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePinless Single Swinging Hammer — Extended Lifetime\u003c\/strong\u003e\u003cbr\u003eThe pinless swinging hammer design eliminates common wear points found in twin-hammer wrenches — delivering longer service life in high-volume lorry workshop environments where the tool runs all day.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e3-Position F\/R Power Regulator — Torque Control\u003c\/strong\u003e\u003cbr\u003ePrevents overtightening of wheel nuts when refitting — mechanics can select the right torque output for fastening without risking stud damage on expensive lorry hubs.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSide Handle for Safe Operation\u003c\/strong\u003e\u003cbr\u003eTwo-handed operation with the side handle gives mechanics better control when breaking loose heavily corroded or cross-threaded lorry wheel nuts — safer and more effective than single-handed operation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSide Exhaust — Keeps Dust Off the Wheel\u003c\/strong\u003e\u003cbr\u003eDirects exhaust air and oil away from the operator — no dust blown back at the mechanic during tyre changes, important when working in dirty lorry yards and outdoor parking areas.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eCommon Lorry \u0026amp; Truck Applications in Malaysia\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eTayar lori tukar (lorry tyre change) — wheel nut removal and refitting\u003c\/li\u003e\n\u003cli\u003eHino, Isuzu, UD Trucks, Mercedes Actros, Volvo, Scania wheel service\u003c\/li\u003e\n\u003cli\u003eFleet maintenance — daily tyre and brake inspection rounds\u003c\/li\u003e\n\u003cli\u003eHeavy truck chassis and suspension bolt removal\u003c\/li\u003e\n\u003cli\u003eTrailer coupling, fifth wheel and axle fastening\u003c\/li\u003e\n\u003cli\u003eMining and construction plant equipment maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003eE699-8 vs E688-8 — Comparison\u003c\/h2\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eE688-8\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eE699-8\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrive Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\" Square Drive\u003c\/td\u003e\n\u003ctd\u003e1\" Square Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpact Mechanism\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePinless Hammer\u003c\/td\u003e\n\u003ctd\u003ePinless Single Swinging Hammer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Reverse Torque @ 90 PSI\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3,180 Nm (2,340 ft-lbs)\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e4,300 Nm (3,172 ft-lbs)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Reverse Torque @ 120 PSI\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3,800 Nm (2,802 ft-lbs)\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e4,900 Nm (3,610 ft-lbs)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWorking Torque Range @ 90 PSI\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e271 – 3,100 Nm\u003c\/td\u003e\n\u003ctd\u003e360 – 3,400 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWorking Torque Range @ 120 PSI\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e271 – 3,500 Nm\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFree Speed (RPM)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e4,550 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBlows Per Minute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e625 BPM\u003c\/td\u003e\n\u003ctd\u003e750 BPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir Consumption @ Load\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70 CFM\u003c\/td\u003e\n\u003ctd\u003e70 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir Inlet (NPTF)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSound Level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e97.7 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16.5 kg\u003c\/td\u003e\n\u003ctd\u003e16.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e630mm\u003c\/td\u003e\n\u003ctd\u003e578.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eService Lifetime\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eExtended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e**For lorry and heavy truck tyre work, only the E699-8 1\" is powerful enough.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"INGERSOLL RAND","offers":[{"title":"Default Title","offer_id":44238605582548,"sku":"E699-8","price":1701.1,"currency_code":"MYR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/3038\/9972\/files\/sg-11134201-7rbmx-lq4lhxnjgvca1b.jpg?v=1781034087","url":"https:\/\/techno.my\/products\/ingersoll-rand-e699-8-1-inch-air-impact-wrench","provider":"Techno Tools \u0026 Equipment","version":"1.0","type":"link"}