Ingersoll Rand E699-8 Air Impact Wrench, 1 in Drive, 8 in Extended Anvil, Max Torque 4300Nm, 4,550rpm, 16.9kg
- Brands Catalogue (PDF) Muat turun
Tidak dapat memuatkan ketersediaan pengambilan
Ingersoll Rand E699-8 1 in Air Impact Wrench — Pilihan Utama Mekanik Lori Malaysia
The Ingersoll Rand E699-8 is the go-to 1 in air impact wrench for lorry workshops and heavy truck maintenance centres across Malaysia. Delivering 4300Nm of maximum reverse torque – 35% more than the E688-8 – it tackles the toughest lorry tyre bolts, wheel nuts and heavy chassis fasteners that standard 1/2 in impact wrenches simply cannot handle.
If you run a lorry workshop, truck tyre shop or fleet and bus maintenance centre, the E699-8 is the tool your mechanics will reach for every day.
Key Features & Benefits
- Lorry wheel nuts – no problem – 4300Nm at 90psi and 4900Nm at 120psi for 10-stud and 12-stud lorry wheels.
- 35% more powerful than the E688-8 – faster loosening of corroded and overtightened wheel nuts and quicker tyre changes.
- 8 in extended anvil – reaches into recessed lorry wheel hubs where standard anvils cannot.
- Pinless single swinging hammer – eliminates common wear points for a longer service life.
- 3-position forward/reverse power regulator – select the right output when refitting wheel nuts and avoid stud damage.
- Side handle – safer two-handed control when breaking loose corroded or cross-threaded nuts.
- Side exhaust – directs exhaust air and oil away from the operator in dusty lorry yards.
Technical Specifications
| Specification | Value |
|---|---|
| Brand | Ingersoll Rand |
| Model | E699-8 |
| Order code | E699-8 |
| Square drive | 1 in, 8 in extended anvil |
| Max reverse torque | 4300Nm (3,172ft-lb) at 90psi; 4900Nm (3,610ft-lb) at 120psi |
| Recommended torque range | 360–3400Nm |
| Free speed | 4,550rpm |
| Blows per minute | 750 |
| Air consumption under load | 70CFM |
| Impact mechanism | Pinless single swinging hammer |
| Trigger | Push (outside) trigger |
| Air inlet | 1/2 in NPTF |
| Inlet tube | 13mm |
| Sound level | 97.7dB(A) |
| Length | 578.2mm |
| Weight | 16.9kg |
| Housing | Powder-coated silver grey aluminium |
Applications
- Tayar lori tukar (lorry tyre change) – wheel nut removal and refitting
- Hino, Isuzu, UD Trucks, Mercedes Actros, Volvo and Scania wheel service
- Fleet maintenance – daily tyre and brake inspection rounds
- Heavy truck chassis and suspension bolt removal
- Trailer coupling, fifth wheel and axle fastening
- Mining, construction and plant equipment maintenance
Ingersoll Rand 1 in air impact wrench comparison
| Model | Handle | Anvil | Max reverse torque | Free speed | Weight | Best for |
|---|---|---|---|---|---|---|
| 2850MAX | D-handle | Standard | 2850Nm | 5,500rpm | 8.8kg | Most torque for its weight |
| 2850MAX-6 | D-handle | 6 in extended | 2850Nm | 5,500rpm | 9.8kg | Recessed lorry and bus hubs |
| 2175MAX | Pistol grip | Standard | 2715Nm | 4,500rpm | 8.2kg | Lightest 1 in pistol grip |
| 285B | D-handle | Standard | 2000Nm | 5,250rpm | 11.16kg | Everyday lorry tyre work |
| 285B-6 | D-handle | 6 in extended | 2000Nm | 5,250rpm | 12.61kg | Deep-dish lorry wheels |
| 295A | Pistol grip, top handle | Standard | 2000Nm | 5,250rpm | 10.12kg* | Under-vehicle leverage |
| 631L* | D-handle | – | 4300Nm | 3,500rpm | – | Highest torque, heavy bolting |
| 631S* | D-handle | – | 4300Nm | 3,500rpm | – | Heavy truck and plant work |
| 631LSK kit* | D-handle | – | 4300Nm | 3,500rpm | – | 631L with 4 deep impact sockets |
| E688-8* | – | 8 in extended | 3180Nm | – | 16.5kg | Value lorry wheel wrench |
| E699-8 (this model)* | – | 8 in extended | 4300Nm | 4,550rpm | 16.9kg | Step up from the E688-8 |
Source: Ingersoll Rand official product data at 90psi. * Figures from our existing listing data, not yet confirmed on an Ingersoll Rand page. – means the figure is not published.
Why Buy from Techno Tools
- Genuine stock – genuine Ingersoll Rand tools supplied by Techno Tools & Equipment Sdn Bhd, serving Malaysian industry since 2006.
- Local support – our Ampang, Selangor team helps with model selection, spare parts and servicing advice.
- Fast Malaysia delivery – same-day dispatch for orders placed before 4:00 PM, and same-day delivery in the Klang Valley.
- Official tax invoice – every order ships with an official tax invoice for your company records.
Order by 4PM to get delivered next working day! We use 24 hours service with carriers in most cases so that you can get your order delivered on time.
Free delivery for orders above RM500 with a total weight under 22kg. Otherwise, delivery charges are calculated at checkout based on your order’s weight and delivery location.
Further details please click here for more info.
Please notify us within 14 calendar days of receiving your product to request a free exchange or full refund, if eligible. We will cover all return shipping costs, and no restocking fees will apply in this case.
Requests made after 14 days may be accepted at our discretion and will be subject to a 10% restocking fee. Techno Tools & Equipment reserves the right to reject any return request found to be ineligible.
Further details please click here for more info.