Pro’sKit MT-7029N Noise-Filtering PoE Network Toner & Probe Kit — Anti-Interference Cable Tracer for PoE Switches & STP Networks

The Pro’sKit MT-7029N is a professional network toner and probe kit featuring high-frequency filter circuit technology for superior noise elimination during cable tracing. Designed for ordinary networks, PoE switches, UTP and STP shielded cable environments, the MT-7029N supports cable tracing up to 600m, cable mapping and status indication up to 300m, port locator with flashing signal, single-way RJ45 plug crimping quality test, and NCV non-contact voltage detection — all in one compact kit ideal for network installation and maintenance professionals.

5 Key Functions

Transmitter Specifications

Receiver Specifications

What’s in the Box

• MT-7029N Transmitter x1
• MT-7029N Receiver x1
• RJ45 Cable Patch Cords x2
• RJ11 Cable Patch Cords x2
• RJ11 to Alligator Clips Patch Cord x1
• Earphone x1
• Storage Bag x1
• User Manual x1

Features & Benefits

1. Strong Anti-Noise Capability — High-Frequency Filter Circuit
   High-frequency filter circuit technology eliminates electrical noise and interference during cable tracing — delivering clear, accurate signal identification even in busy live network environments with multiple active cables.
2. PoE Switch & STP Shielded Wire Tracing
   Specifically designed to work on active PoE switch networks and STP/SFTP shielded cables where standard toners fail due to signal interference — essential for enterprise and surveillance network installations.
3. Port Locator with Flashing Signal
   Transmits a flashing signal that causes the corresponding port LED on the network switch to flash every ~3 seconds — quickly identifying which physical switch port a cable connects to without guesswork.
4. Single-Way Plug Crimping Quality Test
   Tests RJ45/RJ11/RJ12 plug crimping quality from one end only — no receiver connection required. Individual LED indicators show which pins have failed crimping, saving time during patch cable making.
5. Cable Mapping & Fault Detection — 300m
   Full cable mapping with 8+1 LED indicators identifies straight, crossover, open and short circuit conditions up to 300m — compatible with UTP/STP Cat 5/5e/6/7 and RJ11/12 telephone cables.
6. NCV Non-Contact Voltage Detection — AC 90-1000V
   Built-in NCV on the receiver detects live AC voltage from 90V to 1000V (50/60Hz) without direct contact — providing preliminary safety checks before connecting to unknown circuits.
7. Telephone Line Polarity (+/-) Testing
   Identifies positive and negative polarity on telephone lines — dual colour LED indicator (red = POL+, green = POL-) confirms polarity for correct telephone line connection.
8. Adjustable Sensitivity Receiver
   Volume and sensitivity control knob on the receiver allows fine-tuning of signal reception — reduce sensitivity counterclockwise to isolate the target cable when multiple nearby cables are carrying toner signals via network switch.

Applications

• Enterprise and commercial network cable tracing and identification
• PoE switch network cable tracing on live circuits
• Surveillance (CCTV) and security network cabling
• Data centre cable management and port identification
• RJ45 patch cable crimping quality verification
• Telephone line installation and polarity testing
• General building and campus network installation and maintenance

Why Choose Pro’sKit MT-7029N?

• High-frequency filter circuit for superior noise elimination
• Works on live PoE switch networks — no need to disconnect
• STP and UTP shielded cable compatible
• Port locator flashing signal for fast switch port identification
• Single-way crimping test — no second end connection needed
• Cable mapping with fault detection up to 300m
• NCV detection AC 90–1000V for live wire safety checks
• Telephone line polarity testing
• Trusted Pro’sKit professional network tool quality
• It's replacement model for discontinued MT-7625

Order by 4PM to get delivered next working day!  We use 24 hours service with carriers in most cases so that you can get your order delivered on time.

Free delivery for orders above RM500 with a total weight under 22kg. Otherwise, delivery charges are calculated at checkout based on your order’s weight and delivery location.

Further details please click here for more info.

Please notify us within 14 calendar days of receiving your product to request a free exchange or full refund, if eligible. We will cover all return shipping costs, and no restocking fees will apply in this case. 

Requests made after 14 days may be accepted at our discretion and will be subject to a 10% restocking fee. Techno Tools & Equipment reserves the right to reject any return request found to be ineligible.

Further details please click here for more info.