Fluke 116 True-RMS HVAC Multimeter 600V with Temperature & Microamps | CAT III 600V
Couldn't load pickup availability
The Fluke 116 is a True-RMS digital multimeter designed for HVAC technicians. Built-in temperature measurement with the included 80BK probe and a 600µA microamp range for flame sensor testing sit alongside AutoVolt/LoZ voltage, resistance, continuity, capacitance and frequency, on a backlit 6,000-count display rated CAT III 600V.
Key Features & Benefits
- Built-in thermometer – -40°C to 400°C with the included 80BK Type K probe
- Microamps – 600.0µA AC/DC for flame sensor testing
- AutoVolt / LoZ – automatic AC/DC selection and low impedance to avoid ghost voltage readings
- True-RMS AC voltage
- Resistance, continuity, diode, capacitance and frequency
- Min/Max/Average to record signal fluctuations
- Large white LED backlight for poorly lit areas
- CAT III 600V safety rating; fits the optional TPAK magnetic hanger
Technical Specifications
| Function | Range / Resolution | Accuracy ±(% of reading + counts) |
|---|---|---|
| DC millivolts | 600.0mV / 0.1mV | 0.5% + 2 |
| DC volts | 6.000V / 60.00V / 600.0V | 0.5% + 2 |
| Auto-V / LoZ | 600.0V / 0.1V | 2.0% + 3 (DC to 500Hz); 4.0% + 3 (500Hz–1kHz) |
| AC millivolts (True-RMS) | 600.0mV / 0.1mV | 1.0% + 3 (DC to 500Hz); 2.0% + 3 (500Hz–1kHz) |
| AC volts (True-RMS) | 6.000V / 60.00V / 600.0V | 1.0% + 3 (DC to 500Hz); 2.0% + 3 (500Hz–1kHz) |
| Resistance | 600.0Ω to 6.000MΩ | 0.9% + 1 |
| Resistance (high range) | 40.00MΩ / 0.01MΩ | 5% + 2 |
| Continuity | 600Ω / 1Ω | Beeper on <20Ω, off >250Ω; detects opens/shorts of 500µs or longer |
| Diode test | 2.000V / 0.001V | 0.9% + 2 |
| Capacitance | 1000nF to 9999µF | 1.9% + 2 (to 1000µF); 5% + 20 (above 1000µF) |
| LoZ capacitance | 1nF to 500µF | 10% + 2 typical |
| Frequency | 99.99Hz to 50.00kHz | 0.1% + 2 |
| Temperature (Type K) | -40°C to 400°C / 0.1°C | 1% + 10 (probe error excluded) |
| AC microamps (True-RMS, 45–500Hz) | 600.0µA / 0.1µA | 1.5% + 3 |
| DC microamps | 600.0µA / 0.1µA | 1.0% + 2 |
| Specification | Value |
|---|---|
| Maximum voltage (any terminal to earth) | 600V |
| Display | 6,000 counts, 4 updates/sec; 33-segment bar graph, 32 updates/sec; white LED backlight |
| Battery | 9V alkaline (IEC 6LR61), approx. 400 hours typical without backlight |
| Operating temperature | -10°C to +50°C |
| Storage temperature | -40°C to +60°C |
| Size | 167 x 84 x 46mm |
| Weight | 550g |
| Country of origin | Made in China |
Safety & Compliance
- IEC 61010-1, Pollution Degree 2
- IEC 61010-2-033 CAT III 600V
What's in the Box
- 1 × Fluke 116 HVAC multimeter
- 1 × pair of 4mm silicone test leads
- 1 × 80BK integrated temperature probe
- 1 × holster
- 1 × 9V battery (installed)
- Quick reference guide
Optional Accessories
- Fluke TPAK magnetic meter hanger
- Fluke TL224 SureGrip silicone test lead set
- Fluke TL175 TwistGuard test lead set
- Fluke C25 large soft carrying case
- Fluke C35 soft carrying case
Applications
- HVAC/R service: flame sensor microamp checks on furnaces and boilers
- Supply and return air, pipe and coil temperature checks
- Motor-run and start capacitor testing
- Ghost-voltage-free control circuit checks with LoZ
Fluke 114 vs 115 vs 116 vs 117
| Specification | Fluke 114 | Fluke 115 | Fluke 116 (this model) | Fluke 117 |
|---|---|---|---|---|
| Current (A) | No | 10A AC/DC | No | 10A AC/DC |
| Microamps | No | No | 600.0µA AC/DC | No |
| Auto-V / LoZ | Yes | No | Yes | Yes |
| VoltAlert non-contact voltage | No | No | No | Yes |
| Capacitance | No | Yes | Yes | Yes |
| Frequency | No | Yes | Yes | Yes |
| Safety rating | CAT III 600V | |||
| Best for | Go/no-go electrical checks | General field service with amps | HVAC: flame sensor µA and temperature | Electricians: VoltAlert, LoZ and amps |
| Warranty period | 3 Year Warranty |
|---|---|
| Coverage | Free from defects in material and workmanship for 3 years from the date of purchase. Accessories supplied with the product, such as test leads and probes, are covered for 1 year from the date of purchase. |
| Not covered | Fuses, disposable batteries and manuals; damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. |
| Warranty void if | The product has been used outside its specifications, altered, or repaired by a party not authorised by Fluke. |
Contact Techno Tools with your proof of purchase. The warranty applies to the original purchaser only.
Order by 4PM to get delivered next working day! We use 24 hours service with carriers in most cases so that you can get your order delivered on time.
Free delivery for orders above RM500 with a total weight under 22kg. Otherwise, delivery charges are calculated at checkout based on your order’s weight and delivery location.
Further details please click here for more info.
Please notify us within 14 calendar days of receiving your product to request a free exchange or full refund, if eligible. We will cover all return shipping costs, and no restocking fees will apply in this case.
Requests made after 14 days may be accepted at our discretion and will be subject to a 10% restocking fee. Techno Tools & Equipment reserves the right to reject any return request found to be ineligible.
Further details please click here for more info.