1/2"-2" Electric Hydraulic Pipe Bender DWG-2 | 3 Months Warranty

The DWG‑2 Hydraulic Pipe Bender is a portable, heavy‑duty hydraulic forming tool designed for industrial and workshop use. It operates through a hydraulic cylinder system that applies up to 13 tons of bending force, enabling precise shaping of steel and alloy pipes. The machine’s frame is built from reinforced carbon steel, mounted on caster wheels for mobility, and paired with a GYB‑630E electric pump (optional) for powered operation.

Features

-Hydraulic precision bending: Smooth, controlled bends with minimal pipe deformation.

-Wide range compatibility: Handles multiple pipe diameters from 22–60 mm.

-High output force: 13‑ton capacity ensures consistent results for thick‑wall pipes.

-Portable design: Equipped with wheels for easy movement between workstations.

-Durable construction: Heavy‑gauge steel frame resists torsion and wear.

-Accessory kit: Includes gloves, seals, wrench, and protective packaging for immediate use.

-Optional electric pump: Enables faster operation and consistent pressure control.

Procedure:

1 Switch operation: Begin by turning the switch firmly in a clockwise direction to secure the system, then loosen the bolt to prepare for setup.

2 Lubrication: Apply lubrication evenly to both the mould and the pipe to reduce friction and ensure a smooth bending process.

3 Mould selection: Choose the mould that corresponds to the pipe size, place it securely on top of the actuating rod, and insert the rocker into the lower moulding board.

4 Pipe positioning: Position the pipe correctly, rotate the two rockers so that the grooves align with the mould, and then return the upper moulding board into place.

5 Bending operation: Pump the handle of the hydraulic unit to press the mould against the pipe, continuing until the pipe is bent to the desired angle.

6 Release and removal: After bending, loosen the switch in an anti‑clockwise direction so the actuating rod retracts automatically, then open the upper moulding board and remove the finished pipe.

Specifications

Model    DWG‑2

Stroke    250 mm

Pipe Wall Thickness    2.5–4.5 mm

Bending Range    Φ22–60 mm(1/2"-2")

Bend Angle: π/2≤α<π

Output Force    13 tons

Weight    48 kg

Pump Compatibility    ZCB‑630D (220V, 70 MPa, 1 L/min, 8 L oil capacity, 26 kg)

Accessories    Gloves, sealing rings, hex wrench

FAQs

Q: Does the machine include a hydraulic pump?

A: No, the DWG‑2 is sold as a stand‑alone unit. It can be paired with the ZCB-630D electric pump for powered operation.

Q: Which bending dies are included?

A: Six dies: 60 mm, 48 mm, 42 mm, 34 mm, 28 mm, 22 mm.

Q: Can it bend stainless steel pipes?

A: Yes, but ensure the pipe wall thickness is within 2.5–4.5 mm and use proper lubrication.

Q: What is the DWG‑2 hydraulic pipe bender used for?

A: It’s designed for bending steel and alloy pipes with diameters between 22–60 mm, commonly used in construction, plumbing, and mechanical fabrication.