Electric Hydraulic Pipe Bender DWG-4 1/2"-4" 21T

Only 1 left
SKU: DWG-4
RM5,300.00 MYR
-4% RM5,500.00 MYR RM5,300.00 MYR
  • Visa
  • Mastercard
  • Touch n Go
  • FPX
  • Boost
  • ShopeePay
  • GrabPay
  • PayPal
  • Union Pay
  • Maybank
  • Google Pay

Pickup available at No.36-1, Jalan Sulaiman 1,

Usually ready in 2-4 days

Got questions?

Feel free to WhatsApp us

Ask an expert

Chat Email +6012-9725395

PRE-ORDER 30 DAYS

The pipe bender is suit for bending welding steel tube which has low pressure to deliver liquid in cold situation. It is also suit for bending common water pipe; carbon steel pipe and thick-wall conduit tube. It is not suit for bending the steel pipe with different diameter and colored metal pipe. The machine can be use in building, Petrol, mines and shipbuilding industry.

 
Max Working Pressure: 63 MPa
Bend Angle: π/2≤α<π
Bending Pipe Size: 1/2"-4"
Pipe Wall Thickness: 2.75-6mm
Output: 21T
Stroke 420mm
Bending Dies: 9 (22mm/28mm/34mm/42mm/48mm/60mm/75.5mm/89mm/108mm)
Motor Rated Power: 750W
Machine Weight / Shipiing Weight: 129KG / 151KG
Pump Weight: 19KG / 22KG
Oil Hose Length: 2m
Dimensions: 118*46*25cm
Features
· The molds are made of ductile iron
High strength, good toughness and plasticity, higher strength than ordinary gray cast iron
· Bend pipe interface
Thickened design with smooth edges and joints with curved nozzles
· Adjustment column
Adjust the bending amplitude of the bent object
· The maximum bending angle of the whole system is 90°
Unable to bend non-metallic pipe, unable to bend square pipe
 
Procedure:
1. Turn the switch tightly with clockwise direction.
2. Loosen the bolt.
3. Add lubrication on mould and the pipe.
4. Choosing corresponding mould base on size of pipe, set mould on the top of actuating rod. Then insert the rocker on nether molding board. Put the pipe, turn two rockers and make the groove point to the mould.
5. Turn back the upper mounding board; shake the handle of pump to make the mould press the pipe, bending the pipe until the angle is shaped.
6.  After  bending.  Loosen  the  switch  anti-clockwise.  The  actuating  rod  would  be  back automatically. Open the upper molding board, get out the pipe.
 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)