KE 2413R

The large transformer jaws, with a diameter of 68mm, enable clamping on all three or four wires (3 phases) simultaneously for leakage current measurement.
- True RMS measurement ensures accuracy even with distorted waveforms.
- Capable of measuring from mA up to AC 1000A.

A frequency filter switch is included to mitigate the effects of harmonics.

- The device features a two-way analogue output terminal:
The AC current detected by the transformer jaws is converted to both AC and DC voltage. An optional output cord, model 7073, can be used for waveform monitoring with an oscilloscope or for connection to a recorder.

Specifications:
- AC Current (50/60Hz):
- Ranges: 200mA/2/20/200/1000A
- Accuracy:
- ±2.5% reading ±5 digits (200mA/2/20A)
- ±3.0% reading ±5 digits (200A, 0~500A)
- ±5.5% reading (501~1000A)

- AC Current (WIDE):
- Ranges: 200mA/2/20/200/1000A
- Accuracy:
- ±1.8% reading ±5 digits (50/60Hz) (200mA/2/20A)
- ±2.0% reading ±5 digits (50/60Hz) (200A, 0~500A)
- ±5.0% reading (50/60Hz) (501~1000A)

- Conductor Size: Ø68mm max.
- Frequency Response: 40Hz~1kHz
- Output Waveform: AC200mV against the maximum value of each range (1000A range is at 100mV)
- Recorder Output: DC200mV against the maximum value of each range (1000A range is at 100mV)
- Crest Factor: ≤3.0
- Withstand Voltage: 3700V AC for one minute
- Applicable Standards:
- IEC 61010-1 CAT.III 300V Pollution degree 2
- IEC 61010-2-032

Power Source:
A single 6F22 (9V) battery provides approximately 60 hours of continuous measurement.

Dimensions:
The device measures 250(L) × 130(W) × 50(D)mm.

Weight:
The weight is approximately 570g, including the battery.

Accessories included:
- Carrying Case (9094)
- One 6F22 battery
- Instruction Manual

Optional accessory:
- Two-way Output Cord (7073)

Country of Manufacture: Japan